 |
Produces
400 Watts of power @ 28mph
12
and 24 volt land and marine models available
27'
and 45' tower and roof mounting kits
(with or w/o seal)
Small,
lightweight, low cost, low maintanence, easy install
3
Year Warrany from the world leader in small wind turbine sales and
manufacturing.

For current pricing, call us toll-free 1-877-964-4188.
Call
us to make sure you get the right product at the lowest price!
|
Marine
Quality: The AIR-X Marine has a powder coated aluminum body, all
stainless steel hardware, marine grade wiring and a water tight housing.
The new body also doubles tip to tower clearance for added reliability
during storms.
Applications
- Sailboats -
Recreational boating
- Offshore beacons
and remote monitoring equipment
- Oceanside homes
& cabins
As the fastest growing energy source in
the world, wind energy is now a popular choice for electricity.
In areas with sufficient wind, wind power provides the most economical
source of green energy. ETA sells turbines by Southwest Windpower,
the world leader in small wind turbine manufacturing, sales,
and exports. With their advanced and innovative design, they offer the
highest power output, the lowest amount
of noise, and the most affordable
prices on the market. These systems create no waste or pollution,
and since the energy comes from the wind, there is never
a need to refuel. In addition, their new design also makes
them very quiet. Why use a noisy, polluting generator
that constantly needs to be refueled? As
conventional energy costs continue to increase, so do your savings.
This is a long term investment that can increase the value of your
property.
| Specifications |
| Rotor Diameter: |
46" (1.14
meters) |
| Weight: |
13 lbs (6
kg) |
| Start up wind speed: |
7 mph (3 m/s) |
| Voltage: |
12 & 24
VDC (36/48 VDC available soon) |
| Output: |
400 watts
at 28 mph (12.5 m/s) |
Features of the AIR X marine
- Unprecedented
3 YEAR WARRANTY
- Carbon Fiber
Composite Blades
- Aircraft quality
aluminum alloy castings
- Exclusive Brush-less
neodymium cubic curve alternator
- Sophisticated
internal battery charge regulator
- Maintenance-free - Only two moving
parts
- Full Marine
Tower Kit available for easy boat mounting.
- Exclusive
Auto-brake-feature that slows the AIR
to a silent spin when the batteries are charged thus extending
bearing life and reducing noise.
- Marine powdercoating and stainless steel fittings
for corrosion protection in a marine environment
- High Wind
Safe Mode - Automatically slows turbine
in potentially damaging winds. Reduces noise when
on or off your boat.
- Neighbor
Friendly.
The next generation AIR-X!
Southwest Windpower is pleased to introduce the latest in small
wind turbines, the AIR-X. The AIR-X
builds upon what has made AIR the world's #1 selling small
wind turbine with technology previously found only in today's mega-watt
class wind turbines.
Much Lower Noise: Previous AIR wind generators
relied on their aero-elastic blade design for protection in high
winds, causing loud flutter noise in winds above 35 mph (16 m/s).
AIR-X’s circuit monitors the wind speed and electronically
slows the blades as it reaches rated output, preventing it from
going into flutter. This results in a much quieter wind turbine.
In high winds, the AIR-X will continue to produce power at a reduced
level until the wind decreases, then maximum output will resume.
Improved battery
charging: Previous designs required 300-400
amp hour battery banks so the trickle charge of the wind turbine
could be adequately absorbed. The charge controller periodically
stops charging, reads the battery voltage, compares it to the voltage
setting and if the battery is charged, it completely shuts off all
current going to the battery. This function is performed within
a few milliseconds. The closer the battery is to its full state
of charge, the more often the circuit repeats this action. This
means any size battery bank from 25 to 25,000 amp hours or higher
can be charged safely. When the battery has reached full charge,
the blades will slow to an almost complete stop. Only when the battery
drops below its voltage set point will it resume charging.
Lower stress
design: Power is limited on the input side of
the electronics by controlling the torque from the blades. The excess
energy no longer has to be dissipated by the electronics resulting
in lower stress on the circuit, bearings and other materials.
Stress occurs primarily in high winds, but under these conditions,
the electronic stall design reduces the blade speed to 600 rpm,
significantly reducing mechanical loading while producing power.
Note: A manual
stop switch control is an available option.
|